Alienware X51 R1/R2: Disassembly

alienware x51 r1 This is a topic that many people are looking for. star-trek-voyager.net is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, star-trek-voyager.net would like to introduce to you Alienware X51 R1/R2: Disassembly. Following along are instructions in the video below:

“Do you know how to perform an autopsy on your system well next. We ll ll show you how to properly disassemble an alienware x51 r1 or r2 and see s inside the alien feasts before starting remember to check out the safety precautions. An esd protection video. Listed below or simply click on the video now basic disassembly.

First unplug. All peripherals attached to the computer. Such as keyboard mouse display etc. Once everything is unplugged unplug.

The ac adapter to open. The side panel lay the system down on its right side. There is a screw on the back of the system. Securing the left side panel remove the screw carefully and gently push the left side cover towards the front of the system apply enough force just to release the left side cover carefully flip the left side cover towards the top of the chassis.

Do not pull the side cover right away from the system chassis..


Since the lighting board cable needs to be removed disconnect the lighting board cable and completely remove the side cover to remove the optical drive disconnect the cable from the optical drive then remove the screws securing the optical drive and cage to the system chassis slide the optical drive and cage away from the front of the system and remove the optical drive is enclosed in a cage to remove it remove the two screws on the left securing the optical drive to the cage. Then just slide the optical drive out through the rear of the optical drive cage to remove the video card remove the two screws securing the video card cage to the system chassis pull up the video card cage. Carefully flip the video card cage to reveal the video card underneath. It unlatch.

The retention piece on the cage disconnect. The video card power cables from the video card. And then remove. It there will be one or two cables.

Depending on your video card model. The video card is enclosed in a cage to take it out unlatch. The retention piece on the cage. Now turn around the card and locate the pci express slot latch while pressing down this latch pull up the video card carefully to remove the cpu fan duct remove the two screws securing it to the system.

Then just pull it up to remove the wireless card unplug the wireless card and tanis then remove the screw that secures the wireless card finally remove the wireless card..


If you have an x51 r2 configured with an m sata drive then it will be located in the same slot instead of the wireless card to remove it simply remove the screw securing it to the motherboard and to remove the msa ta card to remove the cmos battery unplug. The cable that connects it to the motherboard and then detach the battery from the audio port backplate. The x51 r2 has an optional dual hard drive cage to remove it first unplug. The hard drive connector from the top hard drive if you have a we ll drive.

There is no need to do this now remove the screw that secures the cage to the chassis finally slide the cage towards the front of the system to remove the drives from the cage. Remove the four screws securing the top drive and then take it out from the cage for the bottom drive remove the four screws now slide the drive to disconnect it to remove the memory gently push the memory. Latches located on one side of the modules now pull out the memory modules. One.

At a time advanced disassembly to remove the cpu heatsink disconnect. The cpu fan from the motherboard. Then unscrew the four screws that are securing the cpu heatsink. This will not come out completely as they are spring loaded pull up the heatsink carefully and remove it to remove the processor press and push the release lever down and out to release.

It from the tab that secures it now open the processor cover finally remove the processor from the system..


Board be careful not to touch the bottom of the cpu or the cpu socket at any time to remove the motherboard unplug. The cpu power cable and the front io board usb cable from the system board also disconnect the power sata powerboard front io and pci fan cables from the system board take note of the routing. So you can replace the cables. Now remove the four screws securing the system board to the system chassis lift up the motherboard at a thirty degree angle then slide it about half an inch towards the front of the system.

Then remove it completely to remove the power board fan remove the screws that secure the fan and pull it out to remove the dc jack unplug. The connector from the power board. Then remove the two screws securing the dc jack cable assembly to the system chassis finally remove the cable from the chassis to remove the power board unplug. All the cables from the power board remember to pull from the connector itself not from the cables.

Now remove the four screws that secure the power board to the chassis finally pull out the power board to remove the front. I ou board disconnect all the remaining cables first then remove the two screws securing the board to the chassis to remove it pull it away from the chassis to remove the right side panel. You might need to move aside the cables to see the screw securing the panel to the chassis. Once you ve located it remove it now put the system in upright position and slide.

The panel towards the front open..


The panel just enough to see the lighting board cable once un plug it hole the cable. Carefully through the routing hole. And remove the panel to remove the front bezel release the front bezel tabs on the left side first release the lower tab. Followed by the two top ones.

Then release the front bezel tabs on the right side once again release. The lower tab first followed by the two top ones. Pull. The power button cable and alien head cables through the routing holes to remove the pci back cover simply release the plastic tabs on the left and right side towards the rear of the system chassis.

Then pull out the cover to remove the bottom cover remove the screws securing the bottom cover to the system chassis. Then release the plastic tabs on the left and right towards the front of the system chassis finally slide the bottom cover towards the front of the system chassis and remove it to remove the top cover remove the screw securing it to the system chassis now simply slide the top cover towards the rear of the system chassis to remove the pci fan remove the two screws securing the pci fan to the system chassis and finally remove the pci fan from the system chess. ” ..

.

Thank you for watching all the articles on the topic Alienware X51 R1/R2: Disassembly. All shares of star-trek-voyager.net are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.
description:

tags:

Leave a Comment