Replacing Cartridges and Printhead – HP Officejet Pro 8500 Premier All-in-One Printer (A909n) HP

hp 8500 This is a topic that many people are looking for. star-trek-voyager.net is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, star-trek-voyager.net would like to introduce to you Replacing Cartridges and Printhead – HP Officejet Pro 8500 Premier All-in-One Printer (A909n) HP. Following along are instructions in the video below:

“First time you set up your printer. You ll need to install the print heads heads and the ink cartridges when you run low on ink. You ll need to the ink cartridges. This video shows you how to perform these actions first we ll install the ink cartridges press.

The power button to turn the printer on next. Open. The ink. Cartridge cover remove each new ink cartridge from its package push each cartridge into its slot.

Do not force the cartridges into the slots each cartridge is designed for its assigned slot. Only if the cartridge does not snap into place check to make sure that the color coding on the cartridge matches that on the printer. If it does not find the right color coded slot. When all cartridges have been installed close the ink.

.


Cartridge cover the printer has both ink cartridges and print heads. The ink. Cartridges store. The ink and the print heads fire drops of ink onto the paper to create your prints.

You ll have to replace the ink cartridges regularly. But the print heads should not have to be replaced very often open the top cover to access the print heads the carriage should automatically move all the way to the left. If it does not press and hold the star button on the printer control panel. Until the carriage moves all the way to the left be careful not to proceed until the carriage is on the left side of the printer.

If the carriage does not move to the left automatically turn the printer off and back on and then try holding down the star button again. The print head can be damaged. If the carriage is not all the way to the left for installation lift the blue print head latch. While the new print heads are still in their packages.

.


Shake them six times shaking. The print heads helps prevent print quality problems later remove the new print heads from their packages. Then remove the orange protective caps. Be careful not to shake the print head after the caps.

Have been removed insert each print head into its color. Coded slot. Lower the print head latch and snap. It into place next close the top cover.

Whenever you insert or replace a print head the printer automatically aligns the print heads to ensure the best print quality if the printer doesn t automatically print. The alignment page start the alignment process manually to start the alignment process manually perform the following steps on the touch screen press. The icon of the wrench to enter the setup menu using the arrow buttons navigate to the tools option and select it using the arrow buttons again navigate to the align printer option and select it the alignment process starts replacing the ink cartridges is almost as easy as the first time you installed them press. The power button to turn the printer on open.

.


The ink cartridge cover and remove the old ink cartridge from it s slot. Remove. The new ink cartridge from it s packaging push each new cartridge into its color coded slot. Then close the ink cartridge cover.

Replacing the print. Heads is similar to the way. You initially installed them open the top cover to access the print heads to access the print heads you must press and hold the star button on the printer control panel. Until the carriage moves all the way to the left be careful not to proceed until the carriage is on the left side of the printer.

If the carriage does not move to the left automatically turn the printer off and back on and then try holding down the star button again. The print head can be damaged. If the carriage is not all the way to the left for installation then lift the blue print head latch on the print head that needs to be replaced lift. The blue handle use the handle to pull the print head straight up and remove it from the printer.

.


While the replacement print. Head is still in its package shake it six times shaking. The print head helps prevent print. Quality problems later remove the new print head from its packaging.

Then remove the orange protective caps. Be careful not to shake the print heads. After the caps have been removed insert the print head into its color coded slot. Lower the print head latch and snap.

It into place then close the top cover of the printer after replacing the print head the printer will calibrate and then print out an alignment sheet. Once the alignment pages prints you can begin using your printer. ” ..

.

Thank you for watching all the articles on the topic Replacing Cartridges and Printhead – HP Officejet Pro 8500 Premier All-in-One Printer (A909n) HP. All shares of star-trek-voyager.net are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.
description:

tags:

Leave a Comment