Tutorial: How to overclock your AMD graphics card without damaging it

amd radeonhd 6570 This is a topic that many people are looking for. star-trek-voyager.net is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, star-trek-voyager.net would like to introduce to you Tutorial: How to overclock your AMD graphics card without damaging it. Following along are instructions in the video below:

“To share of the chaos. Let me show you how to overclock your amd s s video exit. The card to boost the performance of your graphics card now this a quite a simple procedure. I m going to show you two ways to do it one is to the amd catalyst software analyst from the msi afterburner and first of all i would like to respond.

A frequently asked question will this damage my graphics card in any way well first of all it cannot damage your graphics card. Because this overclock is being done through a particular software which is inside your windows operating system so anything goes wrong you can always restore the default settings okay it s not even difficult just one button away alright now i m going to show you to you how to do it properly. So you don t even have to restore it to the default settings again it s impossible that you can damage. It the only way you can damage.

It is or what clock it too much and the graphics card gets overheated and the max max. What happen is your graphics card will actually get overheated and the computer will shut down. But it would not even damage your graphics card. It will just give you a warning light you just restore to the default settings and while i yet.

The normal state. It s nothing to be worried about in these kind of situations. So the first way and a simpler way is through the amd catalyst software again this software is you just get it read while you download the drivers so make sure you get the latest version of it ok don t use all the version to overclock anything alright. Again.

Once you have that part solid. If just go into the performance section. Aim..


The overdrive and you will find certain dials over here and some options first of all we will you should always click on enable graphics overdrive so it will be you it will enable you to manipulate these settings now you might find that well first thing you should always keep in mind your ambient temperature. Now in this case. I am in a room temperature of 38 degrees. Which is superbly high okay.

It s very hot and you should not overclock in these kind of situations. Why now as you can plainly. See the temperatures are kind of stable not the best it s showing me 55 57. Obviously i am recording your videos that consume some of the resources.

But anyway 58 degrees is not normal so if you overclock it it might increase the temperature a little bit even more and when you start gaming. And it when it uses the graphics card at 100 of activity. It will get super hot and go up to 85 80 85 degrees. Which you don t want to happen right so make sure your room temperature is good.

Again you cannot do absolutely anything wrong. The worst that could happen is your computer will shut down. And then you have to restart it nothing major is going to happen. There okay so don t don t worry about it now how to overclock it here we have a gpu clock and the memory clock.

Okay these clocks. I m not going to explain what is in detail a clock is basically the time it takes to read an instruction. So 850..


Megahertz is the frequency at which the clock is going on so that s quite a fast amount of frequency for a graphical processing unit that s all i m going to go in detail how to wil clock. It now you should always increase lower and go on higher okay. So you should go a little bit up test. It and then keep going if you pass the test now the gpu clock and the memory clock.

The gpu clock is always a little bit lower than the memory clock for obvious reasons. So don t even attempt to make the memory clock lower than the gpu clock. Which is not possible. But anyway don t try okay it s a minimum is 1200 in this particular graphics card to keep in mind that the megahertz of a graphics card varies depending on the manufacturer how many how on what megahertz he has clocked it that s nothing to do i use a 5770 for the demonstration purposes.

So anyway. So what do you want to do increase five here. Okay let s go play nancy i press it once and increase five and if i press this thing once it also increases five. But press.

It three times alright make this 15 make this five up so go five plus make 15 plus for the memory clock. Apply it all right when you apply it it will just stay there and whenever you turn on the windows your graphics card will be automatically be overclocked to this one again whenever you turn on windows. It s not going to be on all operating systems that you have so it s only going to be on the operating system you that you re overclocking. It that s why it is safer to overclock.

It from here because you will not going to damage. Anything all right you can always reset the default settings. Again..


And now. Since you have overclocked a little bit test. The custom clocks. Now this test is of 10 15 seconds.

Which i cannot do while recording. Because it consumes 100 of the graphics card and while recording and rendering. The video might cause some problems. But what you have to do is press this a small screen with an image will come up it will test your graphics card.

And it will state that if the test has been passed or not if it has been passed you re good. But if it not you have to go back to default settings and try a different clock frequency. Now this would not happen if you go from 5 to 5 and 15 to 15 all right i have done overclocking a lot of times and nothing happens like that so that is the way you do it in on the amd catalyst software and again anything goes wrong default button press it apply it and restore it to the original clock frequency that it came from the manufacturer. That s it that s how easy it is so we ll clock with amd catalyst software.

This is one way the other way is through the msi afterburner. Which i have to say has got a very good interface and all right it seems to be there s an update. But i m not going to bother and download that i m going to stick with this i m just going to show it to you. But you should always download the latest version all right please all right now then you put the gpu temperature right over here.

Which is running quite hot and then you have got your gpu activity. The fan speed etc. So what i m going to do is overclock..


It the same way increase 5. Here and 15 here and press. Apply you can even have 5 different profiles. Let s say you want to do gaming.

So you have got the second profile for gaming and the third profile for video rendering. Which all depending on what you want ok so you can clock your gpu you can clock your memory as per requirements. That s great i would say you can even control your fan speed you can also control the fan speed in the catal software by the way just press. The manual and you will be able to control the fan.

This thing is actually all cho so it does not generate an issue. But if you want to do it manual you can do it manually that s how you overclock it using an amd azure msi afterburner software both of these again simple to use software. The msi has got a little bit. An interface and you re good profiles available for overclocking again.

It only applies. The clock that you ve got over here only at the windows startup. So any damage produced to it can be restored by just pressing the reset button nothing more can nothing worse can happen let s say so this is it semi channel two kills. I hope you like this video rate comment subscribe thank you very much ” .


Thank you for watching all the articles on the topic Tutorial: How to overclock your AMD graphics card without damaging it. All shares of star-trek-voyager.net are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.


Leave a Comment