Creating an SSID for an Enterprise Wireless Network Using Cisco DNA Center

ssids that are visible to wireless clients before configuration are This is a topic that many people are looking for. is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, would like to introduce to you Creating an SSID for an Enterprise Wireless Network Using Cisco DNA Center. Following along are instructions in the video below:

“Ssid is a unique id that is used for naming wireless networks creating an ssid ssid for your enterprise network allows you to establish and maintain wireless connectivity to create ssid for your enterprise wireless network on the cisco dna center homepage go to design and from network settings select wireless under enterprise wireless click add under enterprise wireless network. You carry out these settings in the wireless network. Name ssid field enter a unique ssid name. The ssid name can contain 1 to 32.

Alphanumeric. Characters. All special characters are allowed except for the less than sign and the forward slash also you cannot use a period followed by an asterisk use more than one space choose the preferred type of enterprise network to define quality of service settings. Voice and data optimizes.


The network to access both voice and data traffic while the data only option optimizes the network for wireless data. Traffic check the fast lane checkbox to set the ios devices to receive an optimized level of wireless connectivity and enhance the quality of service to broadcast the ssid using wpa or wpa2 encryption move the broadcast ssid toggle button to the on position. If you choose not to broadcast the ssid you must manually configure the ssid on corresponding clients to enable them to automatically locate and connect to the ssid of the controller when it is within range next choose the required wireless option note that by. Default the dual band operation creates the wlan for both 24.

Gigahertz and 5 gigahertz frequencies choose an encryption and authentication type for this network. There are 3 security options wpa2 enterprise. Which provides a high level of security with eap wpa2 personal. Which provides passphrase based security and open with no security.


Enable mac filtering to limit your wireless lan to mac addresses that you manually add to the network to use wpa for authentication key management choose adaptive or disabled under fast transition to use fast transition for authentication key management choose enable fast transition ensures less disrupted connectivity. When a wireless client roams from one access point to another. Now that you have created an ssid you must associate. It with a wireless profile.

This profile helps you to construct a topology. Which is used to deploy devices on a site to do this click next. If you do not have an existing wireless profile click add to create a new profile creating a wireless profile helps you tag and uniquely identify your wireless network. Enter a name for your wireless profile from the select interface drop down list either choose an existing wireless interface or create a new one to create a new wireless interface from the select interface area click the plus sign enter an interface name and vlan id click add select flex connects local switching to enable local switching of data packets for the wlan enter the vlan id of the interface in the local two vlan field to enable flex connect the vlan id can range from 1.


To 4 0. 9. 4. Click sites to assign the profile to a site under sites choose the site building and floor.

Where the ssid in the wireless profile is to be broadcast click ok and add you ll see that the wireless profile. Has been created successfully the newly created profile appears on the wireless profile page and is automatically selected click finish to associate. It with the ssid. The last step is to create an ip based access control policy to filter traffic between ip network.


Groups on the cisco dna center homepage go to policy ip based access control and from the ip based access control policies click add policy if you have selected flex connect local switching in the wireless profile. A flex connect policy is added if not a standard policy is added click deploy you ve now successfully created an ssid for your enterprise wireless network and associated it with a wireless profile. ” ..


Thank you for watching all the articles on the topic Creating an SSID for an Enterprise Wireless Network Using Cisco DNA Center. All shares of are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.


Leave a Comment