iphone x transparent This is a topic that many people are looking for. star-trek-voyager.net is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, star-trek-voyager.net would like to introduce to you Destroyed iPhone X Restoration & Transparent Housing Rebuild. Following along are instructions in the video below:
“Guys welcome back to another huge jefferies video in this video. I m gonna be be taking an iphone 10 with a destroyed back damaged and detached display and restored to mint condition using a fully custom transparent housing. But before we dive into the repair. I d like to thank i fix it for sponsoring this video and providing me with the tools and replacement screen for this video get past tools and guides at ifixitcom.
Slash you jeffries or at the link below coming back to the iphone 10. This is trying to be a galaxy fold with its fold out display as the glue isn t actually holding in the oled panel anymore and speaking of the oled panel. It is actually damaged. However the glass on top isn t which is a little bit strange.
This is clearly an aftermarket panel. Given it strangely thick bezels at the bottom of the display compared to an original or high quality. Aftermarket screen. Now.
I purchased this iphone. 10 64 gig from ebay for a total cost of 358 australian dollars. Which seems to be a reasonable price for one of these especially in rough condition as this one is i could take it out of the box. And all that was in there was the phone unfortunately.
I didn t get any charges or cables with it which seems to be the go with just about every phone. I purchase. I actually was told that this screen was original. But i can clearly tell it s not as the corners of this screen are oddly shaped.
It is a 64 gig unit. However on ios 12 point four point one along with that i also purchased this custom housing for a total cost of 175 australian dollars. Which is certainly a very very expensive housing. But unlike every other housing online.
This one is fully see through which i believe will look absolutely fantastic on this iphone 10. However this install wasn t without some flaws. Which i ll get to a little bit later on as well as the guy. I actually purchased this off from ebay.
However it s time to start the repair so to begin i ll need to remove the two pentalobe screws from the bottom of the iphone 10. And luckily the frame is actually separated there s no prying whatsoever it just opens right up for this repair you re going to need a bunch of different screwdrivers. The ones. I m removing from a lot of these cover plates are actually trying pieces which aren t too common and you need a tool kit like an eye fix a pro tech tool kit.
Which has all of the bits you re going to need for pretty much any repair. And it s what i ve been using for the past two or three years now with the battery disconnected. I can begin work by actually opening up the frame. Which has been left behind from the old screen.
I ll need to detach the earpiece speaker cable from that as well because i ll need to reuse that when i attach the new screen onto the phone. It s time to start removing everything as this whole housing needs to be completely gutted before it can be transferred across into the new housing. This is a big job as the new housing contains no parts whatsoever..
Even the smallest little metal grills for the speaker and microphone need to be moved across with all of the flex cables loose. And the camera removed i can start unscrewing. The three screws holding in the logic board making sure to remove the sim card. First.
And it comes right out of the phone next. I can move along to the dock connector which all of this needs to be unscrewed and removed as well of course and for some strange. Reason apple s used a variety of different screwdriver bits for the dock connector portion of the phone. There s tri wing.
Phillips. And there s also a couple of standoff. Screws. So you re going to be constantly changing in between different bits.
So you can remove all of the screws. So you want to keep those screws organized on something like a magnetic mat from ifixit. So when it comes time to reassemble everything that right screw ends up in the right hole all right so next. I can move across to the battery and i ll need to remove the adhesive strips.
Which are quite difficult to remove and i was actually thinking to myself that i was snapping these off however they re much shorter than previous generations of iphone and they re actually not too bad to remove once you ve actually cleared some space out by removing portions off the dock connector. I actually found these battery dsu strips easier to remove than the ones on the sony xperia x. Which i m about to fix up in a future video after the batteries removed that ll give us access to the face id set and i ll need to carefully remove it from the phone making sure not to rip any of those flex cables. As that is a paired component to the phone.
Which only apple can pair so if that becomes damaged in any way face id unlock will no longer function on the phone moving back to the bottom of the phone. I can remove the dock connector and antennae. Which still remain in the frame. It s a good idea to apply some heat to these cables.
So they come up a bit easier and considering this as going in a transparent housing. I want to try and keep these cables as neat and flat looking as they possibly can so. When everything s reassembled in the new clear housing everything looks nice and factory of course you could install all new components. So everything would actually be brand new.
However i wanted to make sure everything was original and to keep cost low as this was already getting quite expensive. I opted to reuse the pads inside of this housing with the bottom antenna removed. I can move back to the top of the phone and remove a secondary antenna cable. I believe this one is for the wi fi.
But i m not exactly sure on that. But it has a lot of screws and little clips that need to be removed and make sure to put those back in their correct spots. When you reassemble the device of course. I ll then need to loosen and remove the volume and mute switch cable from the housing itself.
You can see there s also this sensor piece down the bottom not quite sure what that s doing. But it s on this same line. So that ll need to be removed with some heat..
I ll also apply plenty of heat to the wireless charging coil. Which for some reason is attached to the volume flex cable and if you damage the wireless charging coil. You d need to replace both components. I did actually opt to buy a new wireless charging coil.
Because i knew that i could damage it getting it up and a new one would just look better with a clear housing. However it didn t come with the cable attached to it so i wasn t able to use it in the end. And i had to reuse this one so i made sure not to break it when i removed it from the housing. I did get it out in one piece.
However it isn t exactly perfect and brand new looking so i did my best to try and flatten out and clean it up as best. I could there s a number of other little small brackets and little wires that go in between different pieces of this phone. Which i ll need to transfer across as well as these brackets on the sides of the phone. Which actually hold down the display panel to the frame itself moving down to an even smaller level of this phone.
I ll need to remove the clips and brackets from the volume and power buttons. Because that is actually what s retaining them in the frame itself taking a look at the new housing. You can see there is a number of finger prints in between the glass and metal frame. Which have been left behind when the guy is actually done his job in laser cutting everything out so that s a little bit of a shame however i did try and clean it up as best i could i still think that s a little bit slack.
Though for housing that almost cost me 200 australian dollars. But moving along it s time to reinstall everything into this new frame. I m going to start with the volume buttons as they re one of these smallest components that will need to be installed. So i can install their brackets and a little retaining spring next.
I can actually transfer across these little gold pads. Which i believe have something to do with the face id sensor probably some sort of way of grounding it to the metal frame of the phone. I m going to actually install a new power button. No reason to this really other than it s got a fresh bit of adhesive on it and i think it will just sit down nicely into the new frame.
So screwing that back together i can start to install the side brackets which i removed from the old frame. And this whole process is basically just in a reverse of what we just did if i had to compare this iphone 10 with some of the other iphones apple s made in the past in terms of repair ability everything seems to be easily enough and modular enough that it can be repaired excluding the face id of course because that s paired to each i phone just like the home button was on the iphone 8 and below now i d like to just point out that i did remove a lot of the adhesive from various components of this phone. Including some of the antenna and the dock connector. The reason for this was it was just gonna look better in the housing.
As it s completely see through now because these were removed off of the old frame. The adhesive was sort of torn and it wasn t sort of a hundred percent perfect so it wouldn t have looked as good in the frame. I also forgot to remove the little metal grills and speaker routing pieces of plastic from the old frame. Which were actually very difficult to remove because of all of the water resistant seals and things that are actually keeping them in place.
So it took a little bit of work to get those out. But once they re installed in the new frame of course everything screws back together i d like to mention. If you do this obviously your phone isn t going to be water resistant like it was from the factory. As i haven t been able to source out any of the gaskets that go around the dock connector or the speaker vents with that being said this phone s obviously more of a showpiece than it is something that you want to be taking underwater now while i was installing all of these components.
I was constantly going back with my microfiber cloth making sure to polish up the glass and make sure. There s no dust dirt or any kind of fingerprints or anything left behind because that would just look really bad if i sealed up the device. Only to find a heap of dirt and fingerprints on the inside of the phone..
Which just wouldn t look as good so i made sure everything was just about perfect before i assembled into pieces. I also had to transfer across the little plastic piece that goes in the sim tray and that actually just helps the tray eject and then i can install the wireless charging coil and volume button cable and screw it back into place actually took a little bit to line up the mute switch as it was a lot different of a design than previously seen in some of the older iphone models with everything screwed in i m going to align and press down the old wireless charging coil back into the phone and you can see the phone is now starting to take shape. And we re almost done with the housing of the phone next. I went to install the new flash and microphone into the camera lens and i was having a little bit of trouble with this as it just wasn t staying in place.
And i couldn t quite get it lined up so we decided to do this a little bit off and the camera lens fell out of the housing. So i jumped on twitter and informed you guys of my behind the scenes issue. I had run into now i didn t mention where or who i d gone the housing from. But i did inform him only to be blocked shortly after and from what other people had sent me.
He d blamed me for not testing the housing after having it for almost one month. And that therefore i am a low quality customer that he must block a bit strange. But anyway. I was able to glue the camera lens back in with some adhesive however i will come back at a later date with something much more strong to actually hold that in place so it is together.
But i wouldn t say it is up to my standard. So i will come back off camera and fix that up later on. But it s such a small little issue you took very seriously and didn t really want anything to do with me after it so anyway. I won t be getting any more housings from that guy.
But luckily it was something that i can fix and not like the entire frame fell apart. Something i should mention is that the glass panel on the back isn t actually glued to the metal frame like originally was so if you want to drop this iphone. 10. It s likely to shatter everywhere.
And the glass will actually fall out of the back. As originally the glass panel is glued to the metal frame. So when it cracks. It doesn t sort of shatter into a million pieces with that in mind.
I can install the logic board back into the frame itself and work on the camera making sure. It s lined up properly and installing it s appropriate bracket and screws next. I can move along and connect all of the flex cables. There is absolutely a lot of these on the iphone 10 compared to all the generations.
But i also missed this little bracket which holds in the display. So i just had to grab that off the old housing and put that back in place with the housing prepped and ready to go. It s time to crack out my ifixit replacement display which i m going to be installing on er this phone so opening it up there s not much you need to do in terms of preparation for the iphone 10 screens other than to transfer across the earpiece. Which is actually really simple to do on this phone.
Three screws and everything is pretty much ready to go now. As this display is a replacement. It won t apples true tone function and as i didn t have the original screen. I didn t have the data to copy across.
But i have had some luck using three you tools and ajc pro 1000s to retrieve this data and repair true tone. So i assembled the phone one to test it out. But to also to prepare the display for a reprogram as you can see in settings..
There is no true to an option as the screen as a replacement and the setting has suddenly disappeared. So i connected it up to a pc and opened up three you tools only to find that it can t find the screen serial number however i could find something called the cover board. Number. Which is also something that needs to be programmed under the screen.
So i decided just to try that one and see if that would work with the true tone. However i wasn t able to program the screen. I m not quite sure why this was however it just kept defaulting back to what it was programmed from. Which is just a letter x.
Given. It s an iphone 10 screen moving along to the battery. Though i didn t want to install the original apple adhesive strips because if they snap. I have no way of removing the battery because prying up the battery would obviously crack the glass as there s no metal.
Which is sort of supporting the back of the battery. So i used some double sided adhesive. Which probably isn t the best choice and i will come in here and replace that when i find something better if you guys have any suggestions let me know down below next. I can go ahead and install the water resistant seal.
Which goes in between the frame and the display. This is really important for a transparent housing of course because you don t want any dust entering underneath the screen and getting in between any of the components. As a dirty inside to one of these transparent housings would just look really bad over time. I if dust was allowed inside the device next.
I can get the ifixit display remove its protective film and connect it up to the iphone 10 with its connections seated in place. I can also connect up the battery and install the big bracket that goes over all of the flex cables on the logic board finally i can begin removing the plastic film. Which is covering up the adhesive on the perimeters of the phone and once all of that has removed it s time to seat the display back onto the phone. When you do this make sure that the cable for the screen.
Doesn t get caught in between the screen and the frame once you re all good there you can press it down and install the bottom pentalobe screws back into the phone. I can then remove the plastic film on the top of the screen and we re done so this is it a custom transparent. I phone 10 that we made using a completely destroyed iphone. 10 with a shattered back a loose display that was also faulty and we transformed it into something unique and one of a kind unfortunately.
I won t ever be able to buy one of these housings from this guy. Because he blocked me over the smallest little issue which probably isn t a very good business model to go by however this phone turned out fantastic. I will have to fix up that camera lens later on so don t worry too much about how that looks. This is definitely a phone that will stun people for years to come it looks spectacular alongside my transparent galaxy s8 and iphone 4s to go in my collection of transparent devices and on that note.
This has been a huge efi s video. If you like what you saw hit that subscribe button and consider checking out the custom and model tech playlist for more videos. Just like this one also make sure to follow me on my social media. Link for which is down in the description.
That s all for this video. And i ll catch you guys next ” ..
Thank you for watching all the articles on the topic Destroyed iPhone X Restoration & Transparent Housing Rebuild. All shares of star-trek-voyager.net are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.