molex 4 pin connector This is a topic that many people are looking for. star-trek-voyager.net is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, star-trek-voyager.net would like to introduce to you Fan Sleeving Guide For Noobs Common Fan Cables 3pin 4pin Molex Daisy Chain. Following along are instructions in the video below:
“Youtube. What s up guys. There s a few questions going around about how you you can hook up computer speakers to one of these old pieces of shit tv. Fucking john really see those tvs.
They don t have a they don t have a jack reading plug in home headphones. Like a headphone jack like this this i could not login to my tv. Because it only has holes for these fucking liars. He s the only wires you employed into this kind of tv.
So one question is hey if i don t have speakers. I had a fuck my plug back a better sound well you ve used computer speakers. And it s really easy. Actually yeah.
What i have here. I have a whole shitload of these wires right now i have these two wires. They are in the back of my tv and the other ones there just dangle and i m gonna show you how to connect your computers together and of these wires are just a real simple. I need is i actually don t have a spare one to show you spent the bear with here we go.
This isn t fuck fuck this whole box thing that you re looking at right here this is a receiver. You re gonna need one of these adaptors. It just looks like this piece right here it slides. Its slides right over it.
Didn t do that it s an adapter to make one of these bigger. So it looks like that so you re gonna get one of those if that doesn t makes headphone jack bigger. What you re gonna do is when you plug doesn t really matter. What speak what liars you plug in home.
Just make sure you have one year left out put one in your right outlet mine. I have a red and i have a white he s too big on the back of your tv. So fuck that third duck their lives are in the backyard. Even now this other side you gotta worry about now same colors take your red your white or whatever color.
You guys are using. I m using red and white to that angle. What you want to do is on your adapter piece you want to touch you want to touch your white teal belt. Once what s the white like right there and the red.
See this part right there and you just pretty much lay them across there until you can get that sound. You know you will be able to tell when they re on there and you pretty much it s gonna go like this and you re just gonna duct tape them there i actually have one set up i don t know if this has been playing the whole time. This is what i got hooked up in my tv. Right now with the black option you look out that speaker is linked to that piece of shit and it is linked by this piece.
I made and you can see i had my white and my red and there we go and this actually is a pretty good connection alright..
Yeah. There we go fuck this yellow wire. This is just just doing nothing at all right now so so that my red and the white. They re both connected to this computer.
Part and when you fuck around this this is gonna get a ladder and salter. If you just leave it alone. It won t do anything i ll just stay at a normal level. But as you can see it will keep going to that that jack that i have over top of a computer.
Where you would plug your ipod or where you would plug the computer speakers into your computer. I have an adapter over that piece and both my red and my y. My red. My white are touching to a certain part of that adapter now the pending on what at that do you have you got that mess around and you can see what kind of connection you can get.
But eventually get a sound out of it so just like that guys these scoob s through the computer. This wire here needs to are plug into the back of my tv. And there s your that s how you do it after that sometimes i know some speakers. Some speakers.
I got they got a little headphone hole order for the fuck can i get it in the camera. This little headphone. All you plug your headphones into your fucking. Computer speakers.
Well. I actually have that connected sometimes. When i m you know i got my friends or goes on i will plug this into if i want to into those badass things make it fucking extra well back there. So uh pretty much put that help you got any questions feel free to ask i ll see you oles.
Facing the camera are where the wire connectors poke out their little pins to keep the wire from falling out. And this next picture is of an individual wire with its connector. The pin that i was talking about in the previous photo is sticking out on the bottom of the connector. If you ever need to head back to reference these photos.
There will be a link in the description that sends you straight back to this point in the video now to remove these wires. You re gonna want to push down on the pin. While pushing in on the wire. So that the pin doesn t rest on the plastic and goes down.
If you re lucky this tool that i use first will work for you and all of them will come out at once. However you may end up having to do them all individually. Which is what i did here it may require a little bit of force. But you don t want to use too much as to smash down the connectors or to pull the wire right out of the connector now moving on to the molex connector.
Now on your screen is an individual wire with its connector..
The top right part is the end of that we have to use our tool lan to get it out of the molex piece you can see both ends have pins in them. But you shouldn t have to manipulate the bottom left end at all now. This is what the inside of the molex piece looks like the bottom left end that i was talking about in the previous photo is what you re seeing so you should be able to understand that it can pull right out if not for the other end of the connector and on top of the molex piece. It s a little hinged plastic door.
Which should be pretty easy to remove and put back in place. As long as you don t break it by putting too much force on it which i ll show you right now in the video. As i pop this end right up you can see it kind of sticks on there still and with a little force you should be able to maneuver the plastic tabs out of the connector now for the actual wire pieces you re gonna want to use this tool. Here otherwise.
Some people have mentioned using a pen. If this tool that came in the pack is not available you re gonna want to use your tool on the covered part of the molex piece to maneuver those pins. That we saw in the picture. And you should hear a little click.
And then it should pull right out now with all the connectors removed. You re gonna want to measure your wire. I typically measure all the way from the edge of the fan down to the metal parts of each connector. A good thing to remember is that you can always chop some off by having it short is really gonna suck now for these fans with an extra connector coming off of these standard band connectors you re gonna have to measure an additional smaller piece which i usually do end up measuring a little bit shorter maybe a one millimeter shorter than metal the metal.
That s from the fan connector to the extra connector now i usually write my measurements down and then we can move on to measuring and cutting the paracord you want to make sure that you use a nice clean cut either with scissors or whatever. Other cutting tool you have so that you don t fray the edges. And then you can finally remove the white part from the inside of your sleeping. Now before you get to inserting any cables into the paracord you may want to consider melting the edges of the paracord.
So that it doesn t fray while you re maneuvering things through it. I also like to give it a couple taps to open it up a little bit. So that you don t have a super small opening to put things through you will also want to grab some electrical tape to put on the ends of the molex connectors right where the pins are so that doesn t get caught in the paracord. And when you re finally done doing all that you can start by putting the molex connectors that you just taped up into the paracord first one by one and then start to put the smaller pin connectors in one by one.
So there s they re staggered. And don t bunch up inside of the paracord making it easier to cinch them through if you don t have an additional connector you can move on to the next step. Which is heat shrink and if you do have an additional connector you re gonna use that small piece of paracord and since your extra connector pieces through it now moving on to the heat shrinking here. I m using five millimeter heat shrink.
You re gonna want one piece for each end of the wire. So if you have an extra connector. You ll need three pieces. And if you only have the three pin fan connector you only need two pieces the size.
I found that works. The best is about a third of an inch to a half inch in length. Once your heat. Shrink is on and ready like mine you can grab your connectors and measure out how close you can get the heat shrink without interfering with the connector itself usually my heat shrink is about one or two millimeters ahead of my paracord.
This is so that it hugs the paracord close to the wire..
As well as the heat shrink itself hugging close to the wire at the end. So that doesn t slide off as easy and once you re comfortable with a position the heat shrink you can start to heat. It up with either your lighter or your other heat source and then move on to getting the connectors plugged back in now. When you hook your connectors up.
You re gonna want to grab your diagram and a tweezers or something to bend the pins back into place. So that they snap into their little holes and keep everything from falling out for the three pin fan wire. You might have to use something a little extra to push one or two of the wires in if it s not going in on its own. It s gonna be pretty stiff after putting the heat shrink on it and for the molex connector.
You can just slide that back in there the way you took it out. I actually was able to slide my heat shrink up a little bit. So that i could get both the wires back into their little holes. And then put that little plastic latch back on and hear it click and you re good to go now onto the arctic f.
12. Pwm fan once again i ll start by sketching the connectors so that i make sure i remember where my wires go and then we ll take a look at the two connectors on this fan now on your screen is the worst. Most annoying connector in all of computer fans. The pins for the wire are completely internal.
Which means that you have to get something like a precision tweezers or a small needle to even be able to hit the pin and be careful not to stab yourself. Speaking of the pin here is that wire connection with the pin facing in the downward position. And then here is the top view of that same connector you should note the orientation of the notch at the end of the connector. This will help you remember what side the pin is on and finally here is the fully assembled connector just in case you need it for a reference photo now moving on to the four pin fan connector.
Oh look. It s exactly like the 3 pin connector. You can see this connectors pin jutting out at the bottom. And you will see those pins in these four holes on the connector now.
It s time to watch me struggle with this horrible piece of technology first what you ll want to do to get the pin in this power. Sharing connector is push the wire from behind while using your tool to try to get the pin and knock it down well. It s not stuck on plastic and after i struggle for a bit to finally get them all out. We can move on to the four pin fan connector once again.
You ll want to push the wire slightly forward. So that the pin is loose and not stuck on plastic. And if you re lucky you will be able to get all of them with this tool here otherwise you will have to push down on each pin individually and get each wire out by themselves now that i have it fully disassembled. I m going to measure my wire.
I usually measure from the edge of the fan to where the metal part starts. And also don t forget to measure the short distance between the fan connection and the power sharing connection. Once you have this done you can take out your paracord and measure and then cut it you want a clean cut with either a scissors or a sharp instrument. Now we remove the white string inside of the paracord and for a final preparation on the paracord.
I like to tap on the end of it to open it up a bit so that you have a nice big opening and then use your lighter to melt..
It a bit so that it doesn t fray on the end now. We re ready to work the wire through the cord. You can see i m peeling apart some of the glue that s holding these wires together. So that i can put them in there individually and not clog up the opening or make them bunch up now.
I m gonna slow this down here for a moment because this is very important that you don t get these cords bunched up if they aren t separated enough you re gonna end up getting them stuck and if you pull back on these cords. They re gonna have the pin get stuck inside of the paracord and then you re gonna have to tear the paracord out and remeasure and get ready to do that all over again so basically if you don t take your time on this you re gonna have a bad time now we ll speed through the rest of this cinching process is i get my wires all the way through my paracord and then i ll cinch on my little piece of paracord or in between my connectors and finally we re at the heat shrinking process. What you re gonna need is five millimeter heat shrink. I have three pieces one for each end of the paracord.
I usually cut my heat shrink down to pieces that are about a third to a half inch and now we will work all those heat shrink pieces into their respective places. That we need on the end of the paracord and when you have all your heat shrink relatively in position. You re gonna want to grab your connectors and what you ll be using those for is to measure kind of the distance that you can get the wire. And the paracord into the connector with all the pins.
Without a day of bunching up and making it impossible for the pins to click back into place you can see here that i m going to use the connector and figure out where the metal piece is gonna be and i ll shift my heat shrink onto about where i think it ll tap up against the plastic on the connector and then i usually cinch back the paracord just a little distance. This is so that the heat shrink will close down on the wire. And also close down on the paracord keeping it decently snug. So when you have your heat shrink situated in its final resting place you can grab your heat source.
I have a lighter in this video and heat it up and close it up which we will zoom through here. And then we ll move on over to the getting the wires plug back in now you can see with all my heat shrink settled. I ve gotten my diagram back out and what i m gonna do here is i m going to make sure that i pull up the pins gently so those not to break them. But so that they jut out and are able to go back in their little holes and keep the wire from falling out.
I use my little ifixit tweezers set. Which is great for this purpose and then you re gonna use your diagram to plug your wires back into where they should go that should be pretty self explanatory. Now if you need to refer back to the photos. There should be links in the description.
So that you can see where the e pins are and the holes that i m talking about are and when you finally get everything plugged back in where it should be according to your diagram you re good and you successfully sleeved what s one of the more difficult fans to sleeve. You can see my end result. Here looks pretty nice. And it looks like it could have came right out of the box from the factory.
Thank you guys and gals for watching and i hope you enjoyed this tutorial if there was anything that was unclear or that you guys think i could improve on this video. Go ahead and leave a comment. If this video helped you sleeve your fans. Then go ahead and give me a like and expect more of this type of content to be coming your way.
Because i ve got a complete sleeving guide that i m working on it s probably gonna be released in video increments for each type of cable because otherwise. It s gonna be like an hour long so you got that to look forward to so happy sleeping and i ll see you all in the next video. ” ..
Thank you for watching all the articles on the topic Fan Sleeving Guide For Noobs Common Fan Cables 3pin 4pin Molex Daisy Chain. All shares of star-trek-voyager.net are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.